You can view the site in Turkish or English language.Visit Website

Menü Kapat
Innershield Family

Çaplar / Paketleme

Çaplar
 4、5公斤线轴
 4.5 KG SPOOL
 11.3 KG SPOOL
0.9 mm ED016354 ED030637
1.1 mm ED016363 ED030638

Innershield®NR®211 - mp

Kendinden Korumalı Özlü Tel (FCAW-S)

AWS:
AWS A5.20/A5.36:E71T-11

Innershield® NR-211®-MP from Lincoln Electric is a versatile wire suitable for all-position welding of light gauge or thin plate.

Çap

Çap Seçin

  • 0.9 mm
  • 1.1 mm

Paket

Paket Seç

  • 4、5公斤线轴
  • 4.5 KG SPOOL
  • 11.3 KG SPOOL

DETAYLAR

A versatile wire suitable for all-position welding of light gauge or thin plate. Recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 in) to 12.7 mm (1/2 in).

Özellikleri

  • Versatile welding capability on a variety of base materials
  • High operator appeal and good bead appearance
  • Easy slag removal
  • Fast freezing characteristics accommodate poor fit-up

Tipik Uygulamalar

  • Sheet or thin gauge metal
  • Galvanized sheet metal
  • Robotic/hard automation
  • General fabrication
  • 5/16" maximum plate thickness for 0.045" and smaller diameters. 1/2" maximum plate thickness for 0.068 - 3/32" diameters.

Kaynaklama Konumları

  • All

Koruyucu gaz

  • N/A

Servis Bilgileri

Ayrıca İhtiyacınız Olabilir

Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR® -211-MP

ED030638
图片没有找到

Magnum® Kontak Meme - Standart, 0,035 inç (0,9 mm) - 10/paket

KP14-35
图片没有找到

Magnum® Kontak Meme - Standart, 0,045 inç (1,2 mm) - 10/paket

KP11-45
图片没有找到

Magnum® Kontak Meme - Standart, 0,045 inç (1,2 mm) - 10/paket

KP14-45
Tümünü görüntüle

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.SDS Arama sayfası

Test sonucunu görünsorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
AWS AWS A5.36 E71T11-AZ-CS3
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z N 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi)		 Tensile Strength
MPa (ksi)		 Elongation
%
E71T11-AZ-CS3 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T11-AZ-CS3 Requirement DC- 0.30马克斯。 1.75 max. 0.030 max. 0.030 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)		 Wire Feed Speed
m/min (in/min)		 Voltage
volts		 Approx. Current
amps		 Melt-off Rate
kg/hr (lb/hr)		 Deposition Rate
kg/hr (lb/hr)		 Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16 - 17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
0.045 in (1.1 mm) DC- 16 (5/8) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
0.045 in (1.1 mm) DC- 16 (5/8) 2.3 (90) 16 - 17 140 1.0 (2.2) 0.8 (1.7) 77
0.045 in (1.1 mm) DC- 16 (5/8) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
0.045 in (1.1 mm) DC- 16 (5/8) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16 - 17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16 - 17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88