Detalles
Blue Max® MIG wire is designed to perform exceptionally at high wire feed speeds
Características
- Controlled Low Ferrite (Range 3-5)
- Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
- Exceeds 15 mils (0.38 mm) of lateral expansion @ -196°C (-320°F)
Aplicaciones Típicas
- Offshore
- Power Generation
- LPG & LNG storage vessels
Posiciones de soldadura
- All
气体保护
- 98% Ar/ 2% O2
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO.Página de Búsqueda SDS
Ver los resultados de la pruebade limitación de responsabilidad
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.9 | ER316, ER316L |
MECHANICAL PROPERTIES
Classification | Shielding Gas | Yield Strength @ 0.2% Offset MPa (ksi) |
Tensile Strength MPa (ksi) |
Elongation % |
Charpy V-Notch J (ft-lbs) @ -196°C (-320°F) |
Lateral Expansion mil @ -196 °C (-320 °F) |
---|---|---|---|---|---|---|
Typical Result | 98% Ar, 2% O2 | 410 (60) | 590 (85) | 36 | 38-76 (28-56) | 19-35 |
WIRE COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ER316 Requirement | 0.08 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
ER316L Requirement | 0.03 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
Typical Result | 0.01-0.03 | 18.3-18.5 | 0.12-0.18 | 1.7-1.8 | 2.5-2.6 | 0.06 | 0.01 max. | 12.3-12.8 | 0.02-0.03 | 0.01-0.02 | 0.34-0.40 | 4-7 | 4-5 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas | Polarity | Voltage volts |
Approx. Current amps |
---|---|---|---|---|
.035" (0.9 mm) | 98% Ar, 2% O2 | DC+ | 26-29 | 160-210 |
.045" (1.1 mm) | 98% Ar, 2% O2 | DC+ | 28-32 | 180-250 |