DÉTAILS
Aluminum Magnesium alloy commonly used for higher strength welding of 5XXX and 6XXX base materials. Higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.
Caractéristiques
- Conçu pour les applications lourdes
- Réduction des copeaux dans les gaines et amélioration du dévidage
- Alliage d’apport à usage général pour les alliages de la série 5XXX
Exemples d'applications
- Construction navale
- Industrie ferroviaire
- Automobile
- Réservoirs de stockage
Positions de soudage
- All
Gaz de protection
- I1 : Gaz inerte Ar (100%), I3 : Gaz inerte Ar+ 0.5-95% He, Débit : 14.2-23.6 l/min
Service d'information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.页面de矫揉造作的SDS
Consultez le résultat de testClause de non-responsabilité
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
WIRE COMPOSITION
| Classification | %Be | %Mg | %Zn | %Cr | %Cu | %Fe | %Mn | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | 0.0003 max. | 4.5 - 5.5 | 0.10 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 |
| Typical Result | 0.0002 max. | 4.9 | 0.01 | 0.12 | 0.00 | 0.11 | 0.12 | 0.06 | 0.10 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Gas Flow L/min (CFH) |
Polarity | CTWD mm (in.) |
Wire Feed Speed m/min (in/min) |
Voltage volts |
Approx. Current amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 22.0 | 200 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.4 | 230 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 25.2 | 300 |