Diameters / Packaging
Diameters |
50lb Coil |
600lb Speed-Feed® Drum |
---|---|---|
1/8 | ED015262 | ED015268 |
3/32 | ED015260 | ED015261 |
DETAILS
Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing. Great compressive strength under heavy loading. Deposits are generally crack free, machinable and can be flame cut. Deposit thickness is unlimited. Used in Metal-to-Metal wear applications, works best in non-lubricated rolling or sliding.
Features
- Use on carbon, and low alloy steels
- 存款是无限的layers
- Metal-cored wire that is most widely used for caster roll rebuilding
- Works well with Lincolweld 801 Flux or Lincolweld 802 Flux
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.SDS Search page
See test resultdisclaimer
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 801® | Typical Result | 46-50 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Si |
---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.20 | 12.0 | 1.2 | 0.5 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity | Wire Feed Speed m/min (in/min) |
Voltage volts |
Approx. Current amps |
---|---|---|---|---|
3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
3/32 in (2.4 mm) | DC+ | 3.0 (120) | 28 | 375 |
3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 450 |
1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 350 |
1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 500 |
1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 625 |
5/32 in (4.0 mm) | DC+ | 1.4 (55) | 27 | 475 |
5/32 in (4.0 mm) | DC+ | 2.2 (85) | 30 | 650 |
5/32 in (4.0 mm) | DC+ | 2.9 (115) | 32 | 800 |