DETAILS
Designed for vertical down welding of cross-country and in-plant pipe
Features
- High productivity in vertical down and out-of-position pipe welding
- Deep penetration
- Clean, visible weld puddle
- Meets NACE MR0175 for sour gas applications
- Test data available for SSC (NACE TM0177)
Typical Applications
- Root pass welding of up to X80 grade pipe
- Hot, fill and cap pass of up to X70 grade pipe
Welding Positions
- 一个ll
Shielding Gas
- Not Applicable
Special Features
- • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties • Excellent impact properties without the intentional addition of Boron
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.SDS Search page
See test resultdisclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
一个WS | 一个WS A5.5 | E8010-G, E8010-P1 |
CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
Classification | Yield Strength @ 0.2% Offset MPa (ksi) |
Tensile Strength MPa (ksi) |
Elongation % |
Charpy V-Notch J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
---|---|---|---|---|---|---|
E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
Typical Result, As-welded | 460-540 (67-78) | 550-650 (80-94) | 19-29 | 51-114 (38-84) | 34-93 (25-69) | 86-98 |
DEPOSIT COMPOSITION
Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
---|---|---|---|---|---|---|---|---|---|---|
E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
Typical Result | 0.0002 max. | 0.12-0.20 | 0.01-0.05 | 0.59-0.97 | 0.09-0.20 | 0.60-1.00 | 0.01 max. | 0.01 | 0.09-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
Classification⁽²⁾ | Polarity⁽¹⁾ | Current 一个mps |
---|---|---|
4.0 mm (5/32 in) | DC+ | 100-165 |
3/16 in | DC+ | 125-205 |
5.0 mm | DC+ | 130 - 210 |
NOTES
Note |
---|
⁽¹⁾ Preferred polarity is listed first. |
⁽²⁾ Size 3/16 in. is manufactured to US standard units |