DETAILS
Designed for vertical down welding of cross-country and in-plant pipe
Features
- Root pass welding of up to X80 grade pipe
- Hot, fill and cap pass of up to X65 grade pipe
- Vertical down welding
- Meets NACE MR0175 for sour gas applications
- Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)
Typical Applications
- High productivity in vertical down and out-of-position pipe welding
- Deep penetration
- Clean, visible weld puddle
Welding Positions
- 一个ll
Shielding Gas
- Not Applicable
Special Features
- Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.SDS Search page
See test resultdisclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
一个WS | 一个WS A5.5 | E7010-G, E7010-P1 |
ISO | ISO 2560-A | E 46 3 1Ni C 2 1 |
一个BS | 一个WS A5.5 | E7010-P1 |
TUV | 一个WS A5.5 | E7010-P1 |
MECHANICAL PROPERTIES
Classification | Yield Strength @ 0.2% Offset MPa (ksi) |
Tensile Strength MPa (ksi) |
Elongation % |
Charpy V-Notch J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch J (ft-lbs) @ -40°C (-40°F) |
Hardness Rockwell B |
---|---|---|---|---|---|---|
E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. | ||
Typical Result, As-welded | 460-540 (67-79) | 560-660 (81-95) | 22-32 | 54-110 (40-81) | 37-103 (27-76) | 81-91 |
DEPOSIT COMPOSITION
Classification | %B | %C | %Cr | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
---|---|---|---|---|---|---|---|---|---|---|---|
E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | ||
Typical Result | 0.002 | 0.11-0.18 | 0.04 max. | 0.50-0.88 | 0.07-0.20 | 0.010 max. | 0.66-0.97 | 0.01 | 0.01 max. | 0.10-0.40 | 0.01 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity | Current 一个mps |
---|---|---|
3.2 mm (1/8 in) | DC+ | 65-130 |
4.0 mm (5/32 in) | DC+ | 100-165 |
5.0 mm (3/16 in) | DC+ | 130 - 210 |