DETAILS
Designed to produce a nickel bearing weld deposit with impact properties capable of exceeding 27 J (20 ft·lbf) at -29°C (-20°F). It handles poor fit-up in the vertical up position and welds gaps up to 9.5 mm (3/8 in).
Features
- Designed to produce a nickel bearing weld deposit
- Capable of producing weld deposits with impact toughness exceeding 27 J (20 ft·lbf) at -29°C (-20°F)
- Color match on weathering steels
- Handles poor fit-up
- Root bead capability
Typical Applications
- Roundabout groove welds on heavy wall tubular construction
- Offshore
- Bridges and other structural components made from weathering steels
- Structural fabrication
- NACE applications
Welding Positions
- All
Shielding Gas
- N/A
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER.SDS Search page
See test resultdisclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.29 | E71T8-Ni1-H8 |
ABS | ABS - Part 2 | 3YSA |
CWB | CSA W48 | E491T8-A3-Ni1-H16 (E491T8-Ni1-H16) |
DNV-GL | DNV - 2.9 | III YMS H10 |
DB | ISO 17632-A | T 42 3 1Ni Y N 1 H10 |
LR | LR - Chapter 11 | 3YS H15 |
MECHANICAL PROPERTIES
Classification | Polarity | Yield Strength @ 0.2% Offset MPa (ksi) |
Tensile Strength MPa (ksi) |
Elongation % |
Charpy V-Notch J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch J (ft-lbs) @ -40°C (-40°F) |
---|---|---|---|---|---|---|
E71T8-Ni1-H8 Requirement | DC- | 400 (58) min. | 480-620 (70-90) | 20 min. | 27 (20) min. | |
Typical Result, As-welded | DC- | 400 (58) | 510-580 (74-84) | 22 | 120-218 (89-161) | 72-110 (53-81) |
DEPOSIT COMPOSITION
Classification | Polarity | %Al | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | Diffusible Hydrogen mL/100g Weld Metal |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Typical Result | DC- | 0.7-1.0 | 0.0014 | 0.06-0.10 | 0.02-0.04 | 1.08-1.23 | 0.01 | 0.86-1.00 | 0.010 | 0.004 | 0.25-0.29 | 0.01 | 3.9 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity | CTWD mm (in.) |
Wire Feed Speed m/min (in/min) |
Voltage volts |
Approx. Current amps |
Melt-off Rate kg/hr (lb/hr) |
Deposition Rate kg/hr (lb/hr) |
Efficiency % |
---|---|---|---|---|---|---|---|---|
5/64 in (2.0 mm) | DC- | 25 (1) | 1.3 (50) | 16-17 | 145 | 1.4 (3.0) | 1.0 (2.3) | 76 |
5/64 in (2.0 mm) | DC- | 25 (1) | 1.8 (70) | 18-19 | 195 | 2.0 (4.3) | 1.5 (3.3) | 76 |
5/64 in (2.0 mm) | DC- | 25 (1) | 2.3 (90) | 19-20 | 240 | 2.5 (5.5) | 2.0 (4.3) | 78 |
5/64 in (2.0 mm) | DC- | 25 (1) | 2.8 (110) | 20-21 | 275 | 3.0 (6.7) | 2.4 (5.3) | 79 |
5/64 in (2.0 mm) | DC- | 25 (1) | 3.0 (120) | 21-22 | 290 | 3.3 (7.3) | 2.6 (5.8) | 79 |
5/64 in (2.0 mm) | DC- | 25 (1) | 3.5 (140) | 22-23 | 310 | 3.9 (8.5) | 3.0 (6.9) | 81 |